Configured models contain the following attributes:
CableAntenna & PIM AnalyzersSite Masters / Cable TestersPlease use 'Get Quick Quote' and we’ll contact you and quote for your exact need.
You can also get in touch, if you prefer, and our experts will be able to guide you with the right application and procurement solution for this product.
Please refer to the Resources section for Datasheets or see the Product Overview.
If you would like to know more, please get in touch and one of our team will be happy to help.
A lightweight, durable, cable and antenna analyzer, spectrum analyzer, network analyzer, and more
FieldFox is equipped to handle routine maintenance, in-depth troubleshooting and anything in between. FieldFox delivers Keysight-quality measurements – wherever you need to go. Add FieldFox to your kit, and carry precision with you.
The microwave combination analyzer's base function is a cable and antenna analyzer and it can be configured to include a spectrum and network analyzer. FieldFox can be ordered with additional capabilities: power meter, independent signal generator, vector voltmeter, interference analyzer, variable DC source, built-in GPS receiver, and remote control using an iPad or iPhone.
Key Features |
18 GHz max frequency |
Carry the world’s most integrated handheld analyzer: standard model includes cable and antenna analyzer |
Expand capabilities with optional VNA, spectrum analyzer, built-in power meter, vector voltmeter, and more |
Save time by measuring DTF and TDR in the same sweep |
Simultaneously measure all four S-parameters |
Make accurate spectrum analyzer measurements (± 0.5 dB) without needing warm-up |
Calibrate simply with QuickCal |
Lightest all-in-one analyzer at only 6.6 lb. (3.0 kg) |
Specifications | |
N9917A FieldFox Handheld Microwave Vector Network Analyzer | |
Features | Parameters |
Maximum Frequency | 18 GHz |
Minimum Frequency | 30 kHz |
SA Start Frequency | 5 kHz |
System Dynamic Range | 100 dB |
Best Speed at 1001 Point, 1 Sweep | 432 us/pt |
Output Power | -1 dBm |
Trace Noise | 0.004 dB |
Number of Built-In Ports | 2 ports |
Instrument Type | Combination Analyzer |
Cable and Antenna Analyzer | Yes - Standard |
Spectrum Analyzer | Yes - Optional |
Vector Network Analyzer | Yes - Optional |
Additional CAT/VNA Based Features | Vector Voltmeter Mixed-Mode S-Parameters DTF/TDR Cable Measurements |
Additional SA Based Features | Built-In Power Meter Extended Range Transmission Analysis (ERTA) Real-Time Spectrum Analysis Noise Figure Measurements Over-The-Air Measurements |
System Features | Built-In DC Source GPS Receiver - Internal Only Remote Control Capability |
Power Measurement Using USB Sensor | CW or Swept-Frequency Frequency-Offset RF Pulse Test with Peak Sensor |
Standard Attenuator Range | 30 dB |
Standard Attenuator Step | 5 dB |
DANL @1 GHz | -155 dBm |
Maximum Analysis Bandwidth | 10 MHz |
Phase Noise @1 GHz (1 MHz offset) | -113 dBc/Hz |
Phase Noise @1 GHz (10 kHz offset) | -111 dBc/Hz |
Phase Noise @1 GHz (30 kHz offset) | -108 dBc/Hz |
Spur Free Dynamic Range | > 105 dB |
TOI @1 GHz (3rd Order Intercept) | +15 dBm |
Applications Available | Yes |
Maximum Real-Time Bandwidth | 10 MHz |
Overall Amplitude Accuracy | n/a |
Bandwidth Options | 10 MHz (standard) |
Performance Level | ◆◆◆◇◇◇ |
Applications-Cellular | 89600 VSA Software Over-The-Air LTE FDD and 5GTF |
Applications-Digital Video | 89600 VSA Software |
Applications-General Purpose | AM/FM Tune and Listen Cable and Antenna Analysis Field Strength Measurement SCPI Code Compatibility Spectrogram Stimulus Response |
Applications-Wireless Connectivity | 89600 VSA Software |
Handheld / Modular | Yes |
Specifications | |
FieldFox Handheld Microwave Vector Network Analyzer | |
Model Overview | |
Model | Frequency Range |
N9913A | 30 kHz to 4 GHz |
N9914A | 30 kHz to 6.5 GHz |
N9915A/N9925A | 30 kHz to 9 GHz |
N9916A/N9926A | 30 kHz to 14 GHz |
N9917A/N9927A | 30 kHz to 18 GHz |
N9918A/N9928A | 30 kHz to 26.5 GHz |
N995xA Frequency Overview | |
N9950A | 300 kHz to 32 GHz |
N9951A | 300 kHz to 44 GHz |
N9952A | 300 kHz to 50 GHz |
Specifications | |||||
FieldFox Handheld Analyzers Selection Guide | |||||
Model Overview | |||||
Maximum Frequency | Combination Models (CAT + VNA + SA) | Combination Models (CAT + VNA + SA) | VNA Models | VNA Models | SA Models |
4 GHz | N9912A-104 | N9913A | N9923A-104 | ||
6/6.5 GHz | N9912A-106 (2) | N9914A (3) | N9923A-106 (2) | ||
9 GHz | N9915A | N9925A | N9935A | ||
14 GHz | N9916A | N9926A | N9936A | ||
18 GHz | N9917A | N9927A | N9937A | ||
26.5 GHz | N9918A | N9928A | N9938A | ||
32 GHz | N9950A | N9960A | |||
44 GHz | N9951A | N9961A | |||
50 GHz | N9952A | N9962A |
Notes:
(1). Also referred to as cable and antenna analyzer
(2). Maximum frequency is 6 GHz.
(3). Maximum frequency is 6.5 GHz
Specifications | ||||
FieldFox RF and Microwave | ||||
Model Overview | ||||
Model | Description | CAT and VNA Frequency | SA Frequency * | Test Port Connectors |
N9913A | 4 GHz FieldFox RF analyzer | 30 kHz to 4 GHz | 100 kHz to 4 GHz | Type-N (f) |
N9914A | 6.5 GHz FieldFox RF analyzer | 30 kHz to 6.5 GHz | 100 kHz to 6.5 GHz | Type-N (f) |
N9915A | 9 GHz FieldFox microwave analyzer | 30 kHz to 9 GHz | 100 kHz to 9 GHz | Type-N (f) |
N9916A | 14 GHz FieldFox microwave analyzer | 30 kHz to 14 GHz | 100 kHz to 14 GHz | Type-N (f) |
N9917A | 18 GHz FieldFox microwave analyzer | 30 kHz to 18 GHz | 100 kHz to 18 GHz | Type-N (f) |
N9918A | 26.5 GHz FieldFox microwave analyzer | 30 kHz to 26.5 GHz | 100 kHz to 26.5 GHz | 3.5 mm (m) |
N9950A | 32 GHz FieldFox microwave analyzer | 300 kHz to 32 GHz | 9 kHz to 32 GHz | NMD 2.4 mm (m) |
N9951A | 44 GHz FieldFox microwave analyzer | 300 kHz to 44 GHz | 9 kHz to 44 GHz | NMD 2.4 mm (m) |
N9952A | 50 GHz FieldFox microwave analyzer | 300 kHz to 50 GHz | 9 kHz to 50 GHz | NMD 2.4 mm (m) |
Note:
* Useable to 5 kHz