You are browsing the ASIA_EN site. Would you like to be redirected to another country or region to see content and products specific to your location?
US
Quick quote: Fluke 5500A-SC
Fluke 5500A-SC
Multi Product Calibrator; Oscilloscope Calibration Option
Model
5500A-SCProduct Family
CalibrationManufacturer
FlukeConfigured models contain the following attributes:
CalibrationCalibration Standards- Multi-FunctionConfigurations
Key Specs
Product Overview
Resources
Let us help you with your exact configuration
Please use 'Get Quick Quote' and we’ll contact you and quote for your exact need.
You can also get in touch, if you prefer, and our experts will be able to guide you with the right application and procurement solution for this product.
Key Specs
Please refer to the Resources section for Datasheets or see the Product Overview.
If you would like to know more, please get in touch and one of our team will be happy to help.
Product Overview
The 5500A is a revolutionary product that addresses a wide cross-section of your electrical calibration work load. It sources direct voltage and current, alternating voltage and current with multiple waveforms and harmonics, two simultaneous voltage outputs or voltage and current, and simulates power with phase control, resistance, capacitance, thermocouples and RTDs. The 5500A's Oscilloscope Calibration options provide level sine wave, fast edge, time mark and amplitude signals for calibration of oscilloscopes up to 600 MHz.
| Key Features |
| Handheld and bench multimeters |
| Oscilloscopes and ScopeMeter® Test Tools |
| Wattmeters |
| Analog volt/ohm/amp/watt instruments |
| Electronic thermometers |
| Data loggers |
| Strip chart recorders |
| XY Recorders |
| Power harmonics analyzers |
| Process calibrators |
| Current clamps |
| And related instruments |
| Specifications | |
| 5500A Multi-Product Calibrator | |
| Features | Parameters |
| Voltage DC | Range: 0 to ±1020V Best 1 Year Specification: ±50 ppm of setting |
| Current DC | Range: 0 to ±11A Best 1 Year Specification: ±0.01% of setting |
| Resistance | Range: 0 to 3.29.999 MΩ Best 1 Year Specification: ±0.009% of setting |
| Voltage AC | Range: 1 mV to 1020V 10 Hz to 500 kHz, Sine Best 1 Year Specification: ±0.03% of setting |
| Current AC | Range: 29 m A to 11A 10 Hz to 10 kHz, Sine Best 1 Year Specification: ±0.06% of setting |
| Capacitance | Range: 0.33 nF to 1.1 mF Best 1 Year Specification: ±0.25% of setting |
Range: -250°C to +2316°C (11 types) Best 1 Year Specification: ± 0.14°C of setting | |
| RTD Source | Range: -200°C to +630°C (8 types) Best 1 Year Specification: ±0.03°C of setting |
| DC Power | Range: 109 mW to 11 kW Best 1 Year Specification: ± 0.08% of setting |
| AC Power | Range: 109 mW to 11 kW 45-65 Hz, PF=1 Best 1 Year Specification: ± 0.15% of setting |
| Phase | Range: 0 to ± 179.99° Best 1 Year Specification: ±0.15° |
| Frequency | Range: 0.01 Hz to 2.0 MHz Best 1 Year Specification: ±25 ppm of setting |
| Specifications | |
| 5500A Multi-Product Calibrator | |
| Features | Parameters |
| Warm up Time | Twice the time since last warmed up, to a maximum of 30 minutes |
| Settling Time | Less than 5 seconds for all functions and ranges except as noted |
| Standard Interfaces | IEEE-488 (GPIB), RS-232, 5725A (5500A only) |
| Temperature Performance | Operating: 0°C to 50°C Calibration: (tcal): 15°C to 35°C Storage: -20°C to 70°C |
| Temperature Coefficient | Temperature coefficient for temperatures outside tcal ± 5°C is 10% of the 90-day specification (or 1-year, as applicable) per °C |
| Relative Humidity | Operating: < 80% to 30°C, < 70% to 40°C, < 40% to 50°C Storage: < 95%, non-condensing |
| Altitude | Operating: 3,050m (10,000 ft) maximum Non-operating: 12,200m (40,000 ft) maximum |
| Safety | Designed to comply with: IEC 1010-1 (1992-1); ANSI/ISA-S82.01-1994; CAN/CSA-C22.2 No. 1010.1-92 |
| Analog Low Isolation | 20V |
| EMC | Designed to comply with FCC Rules Part 15 |
| Line Power | Line Voltage (selectable): 100V, 120V, 220V, 240V Line Frequency: 47 to 63 Hz Line Voltage Variation: ± 10% about line voltage setting |
| Power Consumption | 300 VA |
| Calibration Documentation | 17025 accredited report of calibration included |
| Dimensions | Height: 17.8 cm (7 in), standard rack increment, plus 1.5 cm (0.6 in) for feet on bottom of unit Width: 43.2 cm (17 in), standard rack width Depth: 47.3 cm (18.6 in) overall |
| Weight (without options) | 20 kg (44 lbs.) |
| Absolute Uncertainty Definition | 5500A and 5520A uncertainty specifications include stability, temperature coefficient, linearity, line and load regulation, and the traceability of the external standards used for calibration. You do not need to add anything to determine the total uncertainty of your calibrator for the temperature range indicated. |
| Specification Confidence Interval | > 99% |
| Specifications | |
| 5500A Multi-Product Calibrator | |
| Model Overview | |
| Model | Description |
| 5500A | Multi-Product Calibrator |
| Accessories | |
| 55XX/CASE | Transit case with wheels |
| 5500A/COIL | 50-Turn Current Coil |
| 5500A/HNDL | Side handle |
| 5500A/LEADS | Test Lead Set |
| 5500A-SC300 | 300 MHz Oscilloscope Calibration Option |
| 5500A-SC600 | 600 MHz Oscilloscope Calibration Option |
| 5725A | Amplifier |
| Y5537 | Rack mount kit |
Resources
File resources
Fluke 5500A Multi-Product Calibrator Extended Specifications Sheet
Fluke 5500A/Leads and 5520A-525A/Leads Technical Data Sheet
Fluke 5500A Technical Data Sheet
Fluke 5520A/5500A Multi-Product Calibrators Extended Specifications Sheet
Fluke 5500A/5520A Multi-Product Calibrator Extended Brochure
Can't find what you are looking for?
Get in touch
