Tektronix DPO5204 TEK-DPO5204 2GHz 4CH Digital Phosphor Scope
Specifications:
Bandwidth: 2GHz
Channels: 4
Sample Rate: 10GS/s on 1 or 2 channels, 5GS/s on all channels
12.5M Sample record length on all channels (standard)
FastAcq with maximum waveform capture rate of >250,000 wfms/s
FastFrame segmented memory acquisition
Serial Triggering and Decode: I2C, SPI, RS232/422/485/UART, USB, CAN/LIN
(Decode only)
LXI Class C compliance
Windows 7 Ultimate 64-bit operating system
Standard removable hard disk drive
Discover events of interest:
FastAcq with maximum waveform capture rate of >250,000 wfms/s
DPO intensity graded display with color or gray scale
Large, bright 10.4" XGA (1024 x 768) display with integrated touch screen
Capture events of interest:
Up to 10 GS/s analog sample rate on 1 GHz and 2 GHz models and 5 GS/s on all
channels on all models
12.5 M Sample record length on all channels standard with options up to 250 M
Samples on two channels on 1 GHz and 2 GHz models
Parallel and Serial Bus Triggering and Decode - Create up to 16 parallel
(clocked or un-clocked) or serial (I2C, SPI, RS-232/422/485/UART, USB) buses
and decode them in busforms and/or timing diagrams
Advanced Triggering - Offers a complete set of triggers, including runt,
pattern, glitch, width, timeout, transition, video, setup/hold violation,
serial bus, and parallel bus
FastFrame segmented memory acquisition mode with a maximum frame rate of
>310,000 frames per second
MagniVu High Speed Digital Acquisition - 16.5 GS/s digital sampling in a 10k
record centered on the trigger point
Search for events of interest:
Wave Inspector navigation with Advanced Search and Mark with up to 8
simultaneous searches
Dedicated front panel controls for pan/zoom, play/pause, and navigation of
marks
Automatically search and mark events of interest in long records in seconds
MultiView Zoom works seamlessly with Wave Inspector to offer the most
intuitive navigation of long records
Analyze events of interest:
53 automated measurements standard
Advanced waveform math with FFT, custom filtering standard
DPOJET Essentials standard on all models
Unit comes standard with four TPP1000 - 1 GHz, <4 pF, probe tip input
resistance 10 MOhm passive voltage probe
Recommended Probe options:
TAP1500 TekVPI 1500 MHz single-ended active probe
TAP2500 TekVPI 2500 MHz single-ended active probe
TDP0500 TekVPI 500 MHz differential active probe
TDP1000 TekVPI 1 GHz, differential active FET probe
P5100 Level I TekProbe 2.5 kV, 100X, 250 MHz high voltage passive probe
P5200 Level I TekProbe 1300 V, 50X/500X, 25 MHz high voltage active
differential probe
*P5205 Level II TekProbe 1300 V, 50X/500X, 100 MHz high voltage active
differential probe
*P5210 Level II TekProbe 5600 V, 100X/1000X, 50 MHz high voltage active
differential probe
TCP0030 TekVPI DC to 120 MHz, 30 A current probe
TCP0150 TekVPI DC to 20 MHz, 150 A current probe
TPA-BNC TekVPI to BNC probe adapter to convert Level II TekProbe interface
to
TekVPI
*Requires TPA-BNC adapter |