Home >> Products >> KT-N9918A
 
Other Configurations. Call our experienced Sales Staff.
 

Keysight Technologies (formerly Agilent) N9918A

30kHz-26.5GHz FieldFox handheld microwave combo analyzer

 
browse
View Data Sheet
Part NumberIncluded Options
Rent/Lease   Buy Used
KT-N9918A/10/210/211/233/Time domain for VNA/Transmission/reflection/Full 2-port S-parameters/Spectrum analyzer
MSRP: $50,988     Our USED Price: Call     
KT-N9918A/208/212/238/308/ALL/USB power sensor measurme/1-Port mixed mode s-param/Spectrum analyzer gating/Vector voltmeter/10/112/210/211/233/235/+
KT-N9918A/210/211/233/238/Transmission/reflection/Full 2-port S-parameters/Spectrum analyzer/Spectrum analyzer gating
KT-N9918A/233/Spectrum analyzer
KT-N9918A/233/235/Spectrum analyzer/Pre-amplifier
KT-N9918A/235/307/P1/Pre-amplifier/GPS receiver/10/210/211/233/236/310
KT-N9918A/235/P3/Pre-amplifier/10/112/210/211/233
KT-N9918A/302/309/310/P3/USB power sensor support/DC bias variable-voltage/Built-in power meter/10/112/210/211/233
KT-N9918A/ALL/10/112/210/211/233/235/+
KT-N9918A/P1/10/210/211/233/236/310
KT-N9918A/P2/10/112/210/211/233/235+
Catalog Description

Keysight Technologies (formerly Agilent) N9918A

30 kHz to 26.5 GHz FieldFox Handheld Microwave Combo Analyzer


Features:
Cable and Antenna Analyzer (standard):
Frequency range: 30kHz to 26.5GHz
Distance-to-fault (dB), return loss, VSWR, dist-to-fault (VSWR), cable
Loss (1-port), insertion loss (2-port) , dist-to-fault (linear or Rho)
Display range: Start, stop, center, span
Return loss, log magnitude -1000 to 1000 dB
Log magnitude resolution 0.01 dB


Network Analyzer (option 210):
Frequency range: 30kHz to 26.5GHz
Transmission/reflection: (S21, S11), mag and phase, one-port
and enhanced response calibration with option 201
Full two-port (S21, S11, S12, S22) with option 211 requires 210
Time domain analysis with option 10, requires option 210 and recommend
211

System Dynamic range: 65dB IF bandwidth = 100Hz;
IF bandwidths 10Hz, 30Hz, 100Hz, 300Hz, 1kHz, 3kHz, 10kHz, 30kHz, 100kHz
Supports Keysight's ECAL modules


Spectrum Analyzer(option 233):
Frequency range: 100kHz to 26.5GHz usable to 5kHz
DANL (displayed average noise level):
-108dBm preamp off; -126dBm with preamp on (option 235)
Phase noise: -106dBc at 10kHz at 1GHz
TOI (third order inter-modulation distortion): +15dBm at 2.4GHz
Resolution bandwidth (RBW)(-3 dB bandwidth): 10Hz to 5MHz
Non-zero span: 1, 1.5, 2, 3, 5, 7.5, 10 sequence

For tracking generator features, you need option 233 and 210.
QuickCal Enhanced response cal, and full 2-port cal (Option 112)

Extended Range Transmission Analysis (ERTA) Option 209
Requires options 233 and 210 Recommend 307.
ERTA is a scalar measurement system based on the use of two FieldFoxes.
One FieldFox acts as the source and reference receiver, while the
second FieldFox acts as the measurement receiver.

Vector voltmeter (VVM) (Option 308)
VVM: 30 kHz to 4 GHz, compare phase and electrical length
IF bandwidth - 10 Hz to 100 kHz
Output power - Low or high

External USB power sensor support (Option 302)
Requires U2000 Series USB average power sensors, and
allows the user to make absolute power measurements

Built-in GPS receiver (Option 307) may require an antenna
GPS receiver The internal GPS receiver can be used as a frequency reference
Modes Off, internal, external
Sync clock On, off
Functionality Geo-location:
Latitude, longitude, altitude, time, sync time/date
Connector for antenna SMA (f), 3.3 V


General information :
Battery life approx 3.5 hours
Test port connector 3.5 mm (m) 50ohm
Data storage:
Internal: Minimum 16MB Up to 1000 instrument states and trace
External: Supports USB 2.0 compatible memory devices;
Supports micro SD and micro SDHC memory cards
Interfaces:
Display 6.5 transfective color VGA-LED backlit
640 x 480 with antiglare coating
Mini USB (1 port) Hi-speed USB 2.0
USB-A (2 ports) Hi-speed USB 2.0
LAN 100Base-T External RJ45 connector

Optional FieldFox accessories:
 KT-N9910X-870 Extra battery
 KT-N9910X-872 External battery charger
KT-N9910X-873 AC/DC adapter
 KT-N9910X-875 DC car charger and adapter
KT-N9910X-880 Extra soft carrying case with backpack and shoulder strap
KT-N9910X-881 Hard transit case

Recommended Calibration Kits:
3.5mm:
 KT-85520A DC-26.5GHz 4-in-1 OSLT mechanical calibration kit, 3.5 mm (m)
 KT-85521A DC-26.5GHz 4-in-1 OSLT mechanical calibration kit, 3.5 mm (f)
 KT-85052D DC-26.5GHz Economy calibration kit, 3.5mm
 KT-85033E DC-9GHz Standard calibration kit, 3.5mm
 KT-N9910X-708 3.5 mm (m)-3.5 mm (f) 26.5GHz 3.28ft (1m)
KT-N9910X-709 3.5 mm (f)-3.5 mm (f) 26.5GHz 3.28ft (1m)
 KT-N4691B 3.5mm series ECal kits

Electro Rent defined bundles:

Option ALL is a bundle of:
10 Time domain for VNA
112 QuickCal
210 Transmission/reflection
211 Full 2-port S-parameters
233 Spectrum analyzer
235 Pre-amplifier
236 Interference analyzer
302 USB power sensor support
307 GPS receiver
309 DC bias variable-voltage
310 Built-in power meter

Option P1 is a bundle of:
10 Time domain for VNA
210 Transmission/reflection
211 Full 2-port S-parameters
233 Spectrum analyzer
236 Interference analyzer
310 Built-in power meter

Option P2 is a bundle of:
10 Time domain for VNA
112 QuickCal
210 Transmission/reflection
211 Full 2-port S-parameters
233 Spectrum analyzer
235 Pre Amplfier
236 Interference analyzer
238 Spectrum analyzer gating
302 USB power sensor support
307 GPS receiver
308 Vector voltmeter
309 DC bias variable-voltage
310 Built-in power meter

Option P3 is a bundle of:
10 Time domain for VNA
112 QuickCal
210 Transmission/reflection
211 Full 2-port S-parameters
233 Spectrum analyzer


LengthWidthHeightShip Wt 
2.8 " 7.4 " 11.5 " 29 lb  
    
N/A Currently not available for sale used
Need Configuration Assistance? Call our experienced Sales Staff.