Home >> Products >> KT-E8361C
 
Other Configurations. Call our experienced Sales Staff.
 

Keysight Technologies (formerly Agilent) E8361C

10MHz-67GHz PNA Vector Network Analyzer

 
browse
View Data Sheet
Part NumberIncluded Options
Rent/Lease   Buy Used
KT-E8361C/14/Configurable test set
KT-E8361C/P2/10/14/16/80/81/83/UNL
Catalog Description

Keysight Technologies (formerly Agilent) E8361C

10 MHz to 67 GHz PNA Vector Network Analyzer, 2-Port, 4 Receivers
Integrated S-parameter test set with four receivers for true TRL calibration.

TRM/LRM calibration, on-wafer, in-fixture, waveguide and antenna measurements
8.4 LCD front panel display with touch screen (1024x768 resolution)
Enhanced Windows graphical user interface;
Hard keys and soft keys for simple operation without a mouse;
Optional configurable test set option 14;



Features:
Measurement Speed: 26usec/point
Number of measurement channels: 32 independent measurement channels
Measured points per sweep: User definable from 2 to 16,001;
Dynamic range up to 67GHz: 94dB standard at 10Hz IF bandwidth
Trace noise: <0.006dB rms at 1kHz IF bandwidth standard
and with option 14
Nominal power: -15dBm standard,
-17dBm with options 14 and UNL

Frequency resolution: 1Hz
Phase noise: 55dBc at 10kHz offset nominal;
Noise floor: <-99dBm 10Hz IF bandwidth standard;
IF bandwidth range: 1 Hz to 40 kHz, nominal


Interfaces:
RF connectors 1.85mm male (50ohm);
VGA video output-15-pin mini D-Sub
GPIB-Two ports: dedicated controller and dedicated talker/listener
USB-1 port on front panel and 4 ports on rear panel
LAN-10/100 BaseT Ethernet; 8-pin configuration auto selects

See also KT-N5227A-200 Series for replacement.

For rack mount kit option 1CM use KT-E8362B-1CM or KT-5063-9217
For rack mount kit option 1CP use KT-E8362B-1CP or KT-5063-9237

May require calibration kits or test port cables (see below).

Compatible cables/cal kits:
 KT-85058B 1.85mm Calibration kit
 KT-N4694A 1.85mm Ecal module
 KT-N4697F 1.85mm Test port cable

Option Dependencies:
16 requires 14 & UNL and is a hardware upgrade
80 requires 14 and is a software & hardware upgrade
81 requires 14 & 80 and is a hardware upgrade
82 requires 14 & 80 and is a software upgrade
83 requires 14, 80 & 81 and is a software upgrade
84 requires 14, 80, 81 & 83 and is a software upgrade
550 requires 14 and is a software upgrade
551 requires 14 and is a software upgrade
H08 requires 14 & 80 and is a software upgrade
H11 requires 14, 80, 81 & UNL and is a hardware upgrade
UNL requires 14 and is a hardware upgrade

Electro Rent defined bundles:

Option P1 includes:
14 Configurable test set
16 Receiver attenuators
80 Frequency offset
81 Reference receiver switch
H08 Pulsed-RF measurement capability
H11 IF access
UNL Extended power range with bias tee

Option P2 includes:
10 Add time domain capability
14 Configurable test set
16 Receiver attenuators
80 Frequency offset
81 Reference receiver switch
83 Frequency converter measurement Application
UNL Extended power range with bias tee

Option P3 includes:
10 Add time domain capability
14 Configurable test set
16 Receiver attenuators
80 Frequency offset
81 Reference receiver switch
H11 IF access
UNL Extended power range with bias tee


LengthWidthHeightShip Wt 
18.75 " 16.75 " 9.5 " 87 lb  
    
N/A Currently not available for sale used
Need Configuration Assistance? Call our experienced Sales Staff.