Home >> Products >> ANR-MW82119B-180
 
Anritsu MW82119B-180
Other Configurations. Call our experienced Sales Staff.
 

Anritsu MW82119B-180

1800MHz DCS Band 40 Watt Battery-operated PIM Analyzer

 
browse
View Data Sheet PDF icon
Part NumberIncluded Options
Rent/Lease   Buy Used
ANR-MW82119B-180/CASE/Transit case
Catalog Description

Anritsu MW82119B-180

1800MHz DCS Band 40 Watt Battery-operated PIM Analyzer


PIM is a form of interference generated by passive components that are
normally thought of as linear such as connectors, cable assemblies, filters
and antennas. However, when subject to high RF power levels found in
cellular systems, these devices can generate spurious signals that increase
the receiver noise floor and reduce site performance.

The PIM Master accurately measures PIM performance by injecting two CW
test tones into the antenna feed network and recording the magnitude of
the 3rd, 5th, or 7th order intermodulation products falling in the receive
band of the system.

The PIM Master 'B' Series incorporates SiteMaster cable and antenna test
features into the PIM Master handheld unit. See option 331


The MW82119B is able to perform the following measurements enabling test
technicians to quickly find and eliminate PIM problems found at the cell site:

PIM versus Time:
3rd, 5th, and 7th order intermodulation product when in receive band
(user selectable)

Distance-to-PIM:
Distance and relative magnitude of multiple PIM sources
Swept PIM: 3rd, 5th, and 7th order intermodulation product when in
receive band (user selectable)

PIM Measurement Ranges:
User selectable TX frequencies within the analyzers band
Tx1: 1805 MHz to 1837 MHz, Tx2: 1857.5 MHz to 1880 MHz
Rx: 1710 MHz to 1785 MHz

40W PIM analyzer - RF Test Power:
Two CW tones +22dBm to +46dBm, 0.1 dBm steps

Residual PIM Performance: <-117 dBm, (2x 43 dBm test tones)
PIM Measurement Range: -70dBm to -140dBm

Interfaces:
Test Port connector 7/16 DIN, female, 50ohm
Dual USB Type A 2x Type A (connect USB Flash Drive and USB Power Sensor)
USB Mini-B 1x Mini-B (connect to PC for data transfer)
GPS SMA, female (with GPS option only)
External Power 2.1 mm x 5.5 mm barrel connector, 12 to 15VDC, < 5.0A
Battery Type Li-Ion 2.5 hours, typical

Option Descriptions:
19 High Accuracy Power Meter
31 GPS Receiver requires external GPS antenna (not included).
331 Cable & Antenna Analyzer

Option 331 Cable & Antenna Sweep:

Measurements: VSWR Return Loss Cable Loss Distance-to-Fault (DTF)
Return Loss, Distance-to-Fault (DTF) VSWR
1-Port Phase, Smith Chart (50/75 ohms selectable)

Output Power: 4 dBm, typical

Measurement: Return Loss <= 1.00 ms/data point, RF immunity low, typ
Speed: Distance-to-Fault <= 1.25 ms/data point, RF immunity low,
typical

Return Loss: Measurement Range 0 dB to 60 dB
Resolution 0.01 dB

Distance-to: Vertical Range Return Loss 0 dB to 60 dB
Fault: Vertical Range VSWR 1:1 to 65:1


Option CASE is a transit case

Recommended Accessory Kits:
 ANR-2000-1746-R PIM Master Accessory Kit
 ANR-2000-1716-R

Option 331 Cable / Antenna Test Accessories
ANR-3653 Type N calibration kit
 ANR-CALKIT/N Precision type N cal kit
 ANR-CALKIT/DIN Precision type DIN cal kit
(See Site Master  ANR-S331E for all calkit items)

Option 31 requires external antenna  ANR-2000-1528-R
Connector saver adapter see  ANR-1091-387-R



LengthWidthHeightShip Wt 
13.8 " 12.4 " 6 " 80 lb  
    
N/A Currently not available for sale used
Need Configuration Assistance? Call our experienced Sales Staff.