Home >> Products >> ANR-MW82119A-850
 
Anritsu MW82119A-850
Other Configurations. Call our experienced Sales Staff.
 

Anritsu MW82119A-850

850MHz Cellular 40Watt Battery-operated Passive Intermodulation (PIM) Analyzer

 
browse
View Data Sheet PDF icon
Part NumberIncluded Options
Rent/Lease   Buy Used
ANR-MW82119A-850
MSRP: $20,695     Our USED Price: $11,495     
ANR-MW82119A-850/31/CASE/GPS Receiver/Transit case
MSRP: $21,760     Our USED Price: $13,000     
ANR-MW82119A-850/CASE/Transit case
MSRP: $21,295     Our USED Price: $13,500     
Catalog Description

Anritsu MW82119A-850

850 MHz Cellular Band 40 Watt Battery-operated PIM Analyzer

PIM is a form of interference generated by passive components that are
normally thought of as linear such as connectors, cable assemblies, filters
and antennas. However, when subject to high RF power levels found in
cellular systems, these devices can generate spurious signals that increase
the receiver noise floor and reduce site performance.

The PIM Master accurately measures PIM performance by injecting two CW
test tones into the antenna feed network and recording the magnitude of
the 3rd, 5th, or 7th order intermodulation products falling in the receive
band of the system.

The MW82119A is able to perform the following measurements enabling test
technicians to quickly find and eliminate PIM problems found at the cell site:

PIM versus Time:
3rd, 5th, and 7th order intermodulation product when in receive band
(user selectable)

Distance-to-PIM:
Distance and relative magnitude of multiple PIM sources
Swept PIM: 3rd, 5th, and 7th order intermodulation product when in receive
band (user selectable)

PIM Measurement Ranges
User selectable TX frequencies within the analyzers band
Tx: 869 MHz to 871.5 MHz, 881.5 MHz to 894 MHz
Rx: 824 MHz to 849 MHz

40W PIM analyzer - RF Test Power:
Two CW tones +25dBm to +46dBm, 0.1 dBm steps

Residual PIM Performance: <-117 dBm, (2x 43 dBm test tones)
PIM Measurement Range: -70dBm to -130dBm

Interfaces:
Test Port connector 7/16 DIN, female, 50ohm
Dual USB Type A 2x Type A (connect USB Flash Drive and USB Power Sensor)
USB Mini-B 1x Mini-B (connect to PC for data transfer)
GPS SMA, female (with GPS option only)
External Power 2.1 mm x 5.5 mm barrel connector, 12 to 15VDC, < 5.0A
Battery Type Li-Ion 2.5 hours, typical

Option CASE is a transit case

May require PIM accessory kit see
 ANR-2000-1716-R or  ANR-2000-1746-R

Option 31 requires external antenna  ANR-2000-1528-R or  ANR-2000-1760-R

Spae battery is  ANR-633-75
Battery charger is  ANR-2000-1374 (battery normally charged in instrument)
Connector saver adapter see  ANR-1091-387-R

LengthWidthHeightShip Wt 
13.8 " 12.4 " 6 " 27 lb  
    
N/A Currently not available for sale used
Need Configuration Assistance? Call our experienced Sales Staff.