Home >> Products >> ANR-MW82119A-192
 
Anritsu MW82119A-192
Other Configurations. Call our experienced Sales Staff.
 

Anritsu MW82119A-192

1900MHz/2100MHz PCS/AWS 40Watt Battery-operated Passive Intermodulation (PIM) Analyzer

 
browse
View Data Sheet PDF icon
Part NumberIncluded Options
Rent/Lease   Buy Used
ANR-MW82119A-192/CASE/Transit case
Catalog Description

Anritsu MW82119A-192

1900MHz/2100MHz PCS/AWS 40Watt Battery-operated Passive Intermodulation (PIM)
Analyzer

PIM is a form of interference generated by passive components that are
normally thought of as linear such as connectors, cable assemblies,
filters and antennas. However, when subject to high RF power levels
found in cellular systems, these devices can generate spurious signals
that increase the receiver noise floor and reduce site performance.
The PIM Master accurately measures PIM performance by injecting
two CW test tones into the antenna feed network and recording the
magnitude of the 3rd, 5th, or 7th order intermodulation products falling
in the receive band of the system.

The MW82119A is able to perform the following measurements enabling
test technicians to quickly find and eliminate PIM problems found at
the cell site:

PIM versus Time
3rd, 5th, and 7th order intermodulation product when in receive band
(user selectable)
Swept PIM
3rd, 5th, and 7th order intermodulation product when in receive band
(user selectable)
Distance-to-PIM (DTP)
Distance and relative magnitude of mutiple PIM sources

Feature:
Tx: 1930MHz to 1935MHz, F2: 2110MHz to 2155MHz
Rx: 1710MHz to 1750MHz

40W PIM analyzer

RF Test Power Two CW tones +25dBm to +46dBm, 0.1 dBm steps

Residual PIM Performance <-117 dBm, (2x 43 dBm test tones)
PIM Measurement Range -70dBm to -130dBm
Test Port connector 7/16 DIN, female, 50ohm
Dual USB Type A 2x Type A (connect USB Flash Drive and USB Power Sensor)
USB Mini-B 1x Mini-B (connect to PC for data transfer)
GPS SMA, female (with GPS option only)
External Power 2.1 mm x 5.5 mm barrel connector, 12 to 15 VDC, < 5.0 A
Battery Type Li-Ion 2.5 hours, typical
AC/DC Adapter Input: 100-240VAC, 50/60Hz , Output: 12VDC

Option CASE is a transit case

May require PIM accessory kit see
 ANR-2000-1716-R or  ANR-2000-1746-R

Option 31 requires external antenna  ANR-2000-1528-R or  ANR-2000-1760-R

Spae battery is  ANR-633-75
Battery charger is  ANR-2000-1374 (battery normally charged in instrument)
Connector saver adapter see  ANR-1091-387-R
LengthWidthHeightShip Wt 
13.8 " 12.4 " 6 " 80 lb  
    
N/A Currently not available for sale used
Need Configuration Assistance? Call our experienced Sales Staff.