Anritsu/Wiltron MS2830A-40 3.6GHz Signal Analyzer
The MS2830A supports an optional vector signal generator (VSG) and can be used
as a reference signal source for tests of parts' Tx characteristics or as a
signal source for tests of Rx characteristics. Installing the VSG option cuts
investment costs and footprint size. The IQproducer PC software generates
waveform patterns for the VSG, supporting various communication methods,
including LTE FDD, LTE TDD (TD-LTE), Mobile WiMAX, etc.
10 MHz and 31.25 MHz Modulation Analysis Bandwidth options can also be
installed
along with various measurement software tools supporting PC-free modulation
analysis of various communication systems. For example, installing the LTE
Downlink/Uplink Measurement Software and LTE IQproducer LTE supports Tx
characteristics/modulation analysis for LTE FDD BTS and Rx characteristics
tests.
Installing the LTE TDD Downlink Measurement Software and LTE TDD IQproducer
supports Tx characteristics/modulation analysis for LTE TDD (TD-LTE) and Rx
characteristics tests. The measurement software options support key wireless
communication systems, such as Mobile WiMAX, W-CDMA/HSPA/HSPA Evolution,
GSM/EDGE,
TD-SCDMA, CDMA2000/1xEV-DO, as well as 3GPP LTE FDD and 3GPP LTE TDD (TD-LTE).
Additionally, there are general-purpose analysis software tools for modulation
analysis of multiplex TDMA systems using BPSK, QPSK, p/4 DPQPSK, 8PSK, 16QAM,
64QAM, 256QAM, 2FSK, and 4FSK modulation methods. Combining these hardware and
software options in custom configurations supports the perfect measurement
solution for every need.
KEY PERFORMANCE
Frequency Range: 9 kHz to 3.6 GHz
Total Level Accuracy: 0.3 dB typ. (including ATT switching dev + freq
response)
*Note: general "absolute" amplitude accuracy does not include ATT switching
deviation and frequency response.
Dynamic Range: 168 dBm (Difference between TOI and DANL as simple reference)
Third-Order Intermodulation Distortion [TOI]: +15 dBm
Average Noise Level [DANL]: -153 dBm/Hz
Adjacent Channel Leakage Power (ACLR): -78 dBc (W-CDMA: with noise
cancellation
function ON)
SSB Phase Noise (*Important for measuring proximity spurious, phase noise, and
narrowband communications):
-107 dBc/Hz (@ 500 MHz, 1-kHz offset, with Opt-062)
-113 dBc/Hz (@ 500 MHz, 10-kHz offset, with Opt-062)
-133 dBc/Hz (@500 MHz, 100-kHz offset, with Opt-062) |